Basic technical data

Performance variants of the pneumatic actuators ПЗ:

Actuator’s type	Conventional designation of the pneumatic cylinder	Additional devices set code	Filter’s code	Pneumatic power supply code
ПЗ	Х – Х (any of the allowed, except 500‑3, 500‑10, 600‑3 and 600–10)	00	0	0
		02, 03, 04, 05, 06, 07 and 08	0 or 1	0 or 1
	500‑3, 500‑10, 600‑3 and 600–10	02, 03, 04, 05, 06, 07 and 08	0 or 1	1

Electro technical devices (electric pneumatic distributors, electric and inductive limit switches, connecting box), included into the additional devices complete set for pneumatic actuators, have explosion-protected performance.

By the resistance to climatic effects the pneumatic actuators correspond to the performance У1 according to GOST 15150-69.

By the resistance to external vibration load the pneumatic actuators correspond to the II grade of rigidness according to GOST 28988-91.

The working position of the pneumatic actuators is preferably vertical. For the pneumatic actuators, completed with the filter-stabilizer (filter code 1), the working position is only vertical.

The force, applied to the surface of the flywheel (steering wheel) of the manual alternate on its largest diameter by the absence of power supply of the power system and the necessary force at the beginning of the rod’s movement from the bottom position and by the movement of the rod from the top position, doesn’t exceed 450 N.

Parameters of the basic pneumatic actuators ПЗ:

Conventional designation of the pneumatic cylinder	Force, developed by the actuator, in the direction of:		Diameter of the connected rod of the closure, mm	Move of the rod, not less, mm	Consumption of the compressed air for the cycle, m³/cycle
Conventional designation of the pneumatic cylinder	closing the valve, not less, kN	opening the valve at the beginning of the rod’s movement from the limit position, not less, kN	Diameter of the connected rod of the closure, mm	Move of the rod, not less, mm	Consumption of the compressed air for the cycle, m³/cycle
50 – 16	8,5	17,0	от 16 до 24	50	0,020
50 – 25	8,5	17,0	” 16 ” 24	50	0,020
50 – 40	8,5	17,0	” 16 ” 24	50	0,020
50 – 63	10,5	21,0	” 16 ” 24	50	0,025
80 – 16	8,5	17,0	” 16 ” 24	80	0,030
80 – 25	8,5	17,0	” 16 ” 24	80	0,030
80 – 40	10,5	21,0	” 16 ” 24	80	0,035
80 – 63	17,0	25,5	” 16 ” 24	80	0,050
100 – 16	8,5	17,0	” 16 ” 24	100	0,035
100 – 25	8,5	17,0	” 16 ” 34	100	0,035
100 – 40	17,0	25,5	” 20 ” 36	100	0,060
100 – 63	32,0	49,0	” 24 ” 36	100	0,100
150 – 16	17,0	25,5	” 24 ” 30	150	0,090
150 – 25	25,0	38,0	” 24 ” 32	150	0,130
150 – 40	41,0	62,0	” 24 ” 32	150	0,195
150 – 63	54,0	80,0	” 24 ” 40	150	0,220
200 – 16	25,0	38,0	” 24 ” 32	200	0,160
200 – 25	41,0	62,0	” 24 ” 36	200	0,220
200/250 – 40	68,0	102,0	” 30 ” 44	200	0,360
200/250 – 63	84,0	126,0	” 36 ” 50	200	0,550
250 – 16	41,0	62,0	” 28 ” 36	250	0,280
250 – 25	68,0	102,0	” 28 ” 36	250	0,400
300 – 16	54,0	85,0	” 32 ” 44	300	0,500
300 – 25	84,0	126,0	” 40 ” 44	300	0,850
350 – 16	54,0	80,0	” 40 ” 44	350	0,580
400 – 16	84,0	126,0	” 40 ” 44	400	0,750
500 – 3	43,0	86,0	60	500	0,500
500 – 10	125,0	188,0	60	500	1,470
600 – 3	43,0	86,0	60	600	0,590
600 – 10	125,0	188,0	60	600	2,200

Overall dimensions and weight of the pneumatic actuators ПЗ for recommended types of additional devices

Conventional designation of the pneumatic cylinder	The code of the additional devices set, filter code, pneumatic power supply code
	00.0.0		02.Х.Х; 03.Х.Х; 04.Х.Х; 05.Х.Х; 06.Х.Х; 07.Х.Х; 08.Х.Х; 09.Х.Х и 10.Х.Х
	Overall dimensions (L ´ B ´ H), mm, not exceeding	Weight, kg, not exceeding	Overall dimensions (L ´ B ´ H), mm, not exceeding	Weight, kg, not exceeding
50 – 16	236 ´ 236 ´ 620	40	516 ´ 410 ´ 760	60
50 – 25	226 ´ 236 ´ 620	40	516 ´ 410 ´ 760	60
50 – 40	236 ´ 236 ´ 620	40	516 ´ 410 ´ 760	60
50 – 63	262 ´ 262 ´ 795	50	542 ´ 410 ´ 760	70
80 – 16	236 ´ 236 ´ 795	70	516 ´ 410 ´ 830	90
80 – 25	236 ´ 236 ´ 795	70	516 ´ 410 ´ 830	90
80 – 40	262 ´ 262 ´ 795	90	542 ´ 410 ´ 830	110
80 – 63	236 ´ 236 ´ 795	70	516 ´ 410 ´ 830	90
100 – 16	262 ´ 262 ´ 900	90	542 ´ 410 ´ 940	110
100 – 25	314 ´ 314 ´ 900	100	594 ´ 410 ´ 940	120
100 – 40	344 ´ 344 ´ 900	120	624 ´ 410 ´ 940	128
100 – 63	314 ´ 314 ´ 900	100	594 ´ 410 ´ 940	120
150 – 16	284 ´ 284 ´ 1210	120	564 ´ 410 ´ 1240	140
150 – 25	344 ´ 344 ´ 1210	130	624 ´ 410 ´ 1240	150
150 – 40	386 ´ 386 ´ 1210	150	670 ´ 410 ´ 1240	170
150 – 63	386 ´ 386 ´ 1210	150	670 ´ 410 ´ 1240	170
200 – 16	284 ´ 284 ´ 1500	155	564 ´ 410 ´ 1535	175
200 – 25	344 ´ 344 ´ 1500	190	624 ´ 410 ´ 1535	210
200/250 – 40	436 ´ 436 ´ 1500	205	720 ´ 436 ´ 1535	215
200/250 – 63	480 ´ 480 ´ 1500	200	760 ´ 480 ´ 1535	220
250 – 16	344 ´ 344 ´ 1630	180	624 ´ 410 ´ 1665	200
250 – 25	360 ´ 360 ´ 1630	190	640 ´ 410 ´ 1665	210
300 – 16	436 ´ 436 ´ 1815	230	852 ´ 430 ´ 1850	250
300 – 25	–	–	760 ´ 480 ´ 1850	250
350 – 16	436 ´ 436 ´ 1960	230	716 ´ 436 ´ 1995	250
400 – 16	480 ´ 480 ´ 2270	270	760 ´ 480 ´ 2305	290
500 – 3	–	–	760 ´ 504 ´ 2500	530
500 – 10	–	–	760 ´ 504 ´ 3020	600
600 – 3	–	–	760 ´ 504 ´ 2750	570
600 – 10	–	–	740 ´ 650 ´ 3540	660
Note – Х – any of the allowed performances

ПЗ

Х – Х

50 – 40

50 – 40

Note – Х – any of the allowed performances